[ 0.000000] Linux version 4.15.0-191-generic (buildd@lcy02-amd64-032) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #202-Ubuntu SMP Thu Aug 4 01:49:29 UTC 2022 (Ubuntu 4.15.0-191.202-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.0-191-generic root=UUID=36d96fd9-53bf-43a7-8ab2-a1b6d130cbc0 ro noresume quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfe7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfe80000-0x00000000dfe97fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dfe98000-0x00000000dfebffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dfec0000-0x00000000dfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M5A78L-M/USB3, BIOS 0801 11/30/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x41e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000420000000 aka 16896M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdfe80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x30df3000-0x346f0fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB490 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x00000000DFE80100 000054 (v01 113011 XSDT1723 20111130 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000DFE80290 0000F4 (v03 113011 FACP1723 20111130 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170831/tbfadt-603)
[ 0.000000] ACPI: DSDT 0x00000000DFE80460 00D80F (v01 A1887 A1887001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 0x00000000DFE98000 000040
[ 0.000000] ACPI: FACS 0x00000000DFE98000 000040
[ 0.000000] ACPI: APIC 0x00000000DFE80390 00008C (v01 113011 APIC1723 20111130 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000DFE80420 00003C (v01 113011 OEMMCFG 20111130 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000DFE98040 000072 (v01 113011 OEMB1723 20111130 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DFE8F460 000038 (v01 113011 OEMHPET 20111130 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000DFE8F4A0 0008BC (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Reserving FACP table memory at [mem 0xdfe80290-0xdfe80383]
[ 0.000000] ACPI: Reserving DSDT table memory at [mem 0xdfe80460-0xdfe8dc6e]
[ 0.000000] ACPI: Reserving FACS table memory at [mem 0xdfe98000-0xdfe9803f]
[ 0.000000] ACPI: Reserving FACS table memory at [mem 0xdfe98000-0xdfe9803f]
[ 0.000000] ACPI: Reserving APIC table memory at [mem 0xdfe80390-0xdfe8041b]
[ 0.000000] ACPI: Reserving MCFG table memory at [mem 0xdfe80420-0xdfe8045b]
[ 0.000000] ACPI: Reserving OEMB table memory at [mem 0xdfe98040-0xdfe980b1]
[ 0.000000] ACPI: Reserving HPET table memory at [mem 0xdfe8f460-0xdfe8f497]
[ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xdfe8f4a0-0xdfe8fd5b]
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041dffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41dfd5000-0x41dffffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041dffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfe7ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041dffffff]
[ 0.000000] Reserved but unavailable: 118 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041dffffff]
[ 0.000000] On node 0 totalpages: 4185630
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14266 pages used for memmap
[ 0.000000] DMA32 zone: 913024 pages, LIFO batch:31
[ 0.000000] Normal zone: 51072 pages used for memmap
[ 0.000000] Normal zone: 3268608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfe80000-0xdfe97fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfe98000-0xdfebffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfec0000-0xdfefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdff00000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xdff00000-0xffdfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x500 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 50 pages/cpu s167936 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s167936 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4120207
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-191-generic root=UUID=36d96fd9-53bf-43a7-8ab2-a1b6d130cbc0 ro noresume quiet splash vt.handoff=1
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[ 0.000000] Memory: 16260288K/16742520K available (12300K kernel code, 2484K rwdata, 4324K rodata, 2468K init, 2724K bss, 482232K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 39485 entries in 155 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 3214.266 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6428.53 BogoMIPS (lpj=12857064)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.028660] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.030760] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.030842] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.030906] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.031137] LVT offset 0 assigned for vector 0xf9
[ 0.031139] process: using AMD E400 aware idle routine
[ 0.031141] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.031142] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.031143] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.031145] Spectre V2 : Mitigation: Retpolines
[ 0.031145] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.040090] Freeing SMP alternatives memory: 36K
[ 0.044005] process: System has AMD C1E enabled
[ 0.153194] process: Switch to broadcast mode on CPU0
[ 0.153202] smpboot: CPU0: AMD Phenom(tm) II X4 840 Processor (family: 0x10, model: 0x5, stepping: 0x3)
[ 0.153292] Performance Events: AMD PMU driver.
[ 0.153295] ... version: 0
[ 0.153296] ... bit width: 48
[ 0.153296] ... generic registers: 4
[ 0.153297] ... value mask: 0000ffffffffffff
[ 0.153297] ... max period: 00007fffffffffff
[ 0.153298] ... fixed-purpose events: 0
[ 0.153298] ... event mask: 000000000000000f
[ 0.153344] Hierarchical SRCU implementation.
[ 0.153991] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.154006] smp: Bringing up secondary CPUs ...
[ 0.154109] x86: Booting SMP configuration:
[ 0.154111] .... node #0, CPUs: #1
[ 0.004000] process: Switch to broadcast mode on CPU1
[ 0.156000] #2
[ 0.004000] process: Switch to broadcast mode on CPU2
[ 0.156108] #3
[ 0.004000] process: Switch to broadcast mode on CPU3
[ 0.158189] smp: Brought up 1 node, 4 CPUs
[ 0.158189] smpboot: Max logical packages: 2
[ 0.158189] smpboot: Total of 4 processors activated (25714.12 BogoMIPS)
[ 0.160782] devtmpfs: initialized
[ 0.160782] x86/mm: Memory block size: 128MB
[ 0.161313] evm: security.selinux
[ 0.161314] evm: security.SMACK64
[ 0.161314] evm: security.SMACK64EXEC
[ 0.161315] evm: security.SMACK64TRANSMUTE
[ 0.161315] evm: security.SMACK64MMAP
[ 0.161316] evm: security.apparmor
[ 0.161316] evm: security.ima
[ 0.161316] evm: security.capability
[ 0.161358] PM: Registering ACPI NVS region [mem 0xdfe98000-0xdfebffff] (163840 bytes)
[ 0.161358] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.161358] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.161358] pinctrl core: initialized pinctrl subsystem
[ 0.161358] RTC time: 10:12:39, date: 08/25/22
[ 0.161358] NET: Registered protocol family 16
[ 0.161358] audit: initializing netlink subsys (disabled)
[ 0.161358] audit: type=2000 audit(1661422359.160:1): state=initialized audit_enabled=0 res=1
[ 0.161358] cpuidle: using governor ladder
[ 0.161358] cpuidle: using governor menu
[ 0.161358] node 0 link 0: io port [1000, ffffff]
[ 0.161358] TOM: 00000000e0000000 aka 3584M
[ 0.161358] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.161358] node 0 link 0: mmio [a0000, bffff]
[ 0.161358] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.161358] node 0 link 0: mmio [f0000000, f9ffffff]
[ 0.161358] node 0 link 0: mmio [fa000000, fbffffff]
[ 0.161358] node 0 link 0: mmio [fc000000, fe8fffff]
[ 0.161358] node 0 link 0: mmio [fe900000, feafffff]
[ 0.161358] node 0 link 0: mmio [feb00000, ffdfffff]
[ 0.161358] TOM2: 0000000420000000 aka 16896M
[ 0.161358] bus: [bus 00-1f] on node 0 link 0
[ 0.161358] bus: 00 [io 0x0000-0xffff]
[ 0.161358] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.161358] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.161358] bus: 00 [mem 0x420000000-0xfcffffffff]
[ 0.161358] ACPI: bus type PCI registered
[ 0.161358] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.161358] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.161358] PCI: not using MMCONFIG
[ 0.161358] PCI: Using configuration type 1 for base access
[ 0.161358] PCI: Using configuration type 1 for extended access
[ 0.164256] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.164256] mtrr: probably your BIOS does not setup all CPUs.
[ 0.164256] mtrr: corrected configuration.
[ 0.165231] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.165231] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.165231] ACPI: Added _OSI(Module Device)
[ 0.165231] ACPI: Added _OSI(Processor Device)
[ 0.165231] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.165231] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.165231] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.165231] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.165231] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.165231] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.273318] ACPI: Interpreter enabled
[ 0.273343] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.273344] ACPI: Using IOAPIC for interrupt routing
[ 0.273380] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.275243] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.275262] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.275876] ACPI: Enabled 7 GPEs in block 00 to 1F
[ 0.284604] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.284610] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.284615] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.284963] PCI host bridge to bus 0000:00
[ 0.284964] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.284966] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.284967] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.284968] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.284969] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xdfffffff window]
[ 0.284970] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.284971] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.284980] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 0.285085] pci 0000:00:01.0: [1043:9602] type 01 class 0x060400
[ 0.285180] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[ 0.285197] pci 0000:00:07.0: enabling Extended Tags
[ 0.285218] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.285299] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
[ 0.285316] pci 0000:00:0a.0: enabling Extended Tags
[ 0.285335] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.285422] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.285441] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
[ 0.285450] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
[ 0.285458] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
[ 0.285466] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
[ 0.285474] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
[ 0.285482] pci 0000:00:11.0: reg 0x24: [mem 0xfe8ffc00-0xfe8fffff]
[ 0.285590] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.285606] pci 0000:00:12.0: reg 0x10: [mem 0xfe8fe000-0xfe8fefff]
[ 0.285731] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.285747] pci 0000:00:12.1: reg 0x10: [mem 0xfe8fd000-0xfe8fdfff]
[ 0.285873] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.285892] pci 0000:00:12.2: reg 0x10: [mem 0xfe8ff800-0xfe8ff8ff]
[ 0.285965] pci 0000:00:12.2: supports D1 D2
[ 0.285966] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.286045] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.286061] pci 0000:00:13.0: reg 0x10: [mem 0xfe8fc000-0xfe8fcfff]
[ 0.286185] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.286200] pci 0000:00:13.1: reg 0x10: [mem 0xfe8fb000-0xfe8fbfff]
[ 0.286326] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.286344] pci 0000:00:13.2: reg 0x10: [mem 0xfe8ff400-0xfe8ff4ff]
[ 0.286417] pci 0000:00:13.2: supports D1 D2
[ 0.286418] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.286501] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.286650] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.286668] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.286676] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.286683] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.286691] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.286699] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.286717] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.286718] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.286719] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.286720] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.286812] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.286948] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.287059] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.287074] pci 0000:00:14.5: reg 0x10: [mem 0xfe8fa000-0xfe8fafff]
[ 0.287200] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.287275] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.287345] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.287412] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.287482] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.287583] pci 0000:01:05.0: [1002:9616] type 00 class 0x030000
[ 0.287590] pci 0000:01:05.0: reg 0x10: [mem 0xfa000000-0xfbffffff pref]
[ 0.287594] pci 0000:01:05.0: reg 0x14: [io 0xd000-0xd0ff]
[ 0.287597] pci 0000:01:05.0: reg 0x18: [mem 0xfeaf0000-0xfeafffff]
[ 0.287605] pci 0000:01:05.0: reg 0x24: [mem 0xfe900000-0xfe9fffff]
[ 0.287622] pci 0000:01:05.0: supports D1 D2
[ 0.287646] pci 0000:01:05.1: [1002:960f] type 00 class 0x040300
[ 0.287654] pci 0000:01:05.1: reg 0x10: [mem 0xfeae8000-0xfeaebfff]
[ 0.287681] pci 0000:01:05.1: supports D1 D2
[ 0.287730] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.287733] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.287734] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
[ 0.287737] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.287771] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.287793] pci 0000:02:00.0: reg 0x10: [mem 0xfebf0000-0xfebf7fff 64bit]
[ 0.287884] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.296038] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.296043] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.296137] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.296158] pci 0000:03:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.296176] pci 0000:03:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.296188] pci 0000:03:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.296259] pci 0000:03:00.0: supports D1 D2
[ 0.296260] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308042] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.308046] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.308049] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.308145] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.308153] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.308154] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.308156] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.308157] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.308158] pci 0000:00:14.4: bridge window [mem 0xdff00000-0xdfffffff window] (subtractive decode)
[ 0.308159] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[ 0.309082] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 12 14 15)
[ 0.309139] ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15)
[ 0.309195] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[ 0.309250] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.309306] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.309362] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.309417] ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
[ 0.309472] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.309763] SCSI subsystem initialized
[ 0.309787] libata version 3.00 loaded.
[ 0.309787] pci 0000:01:05.0: vgaarb: setting as boot VGA device
[ 0.309787] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.309787] pci 0000:01:05.0: vgaarb: bridge control possible
[ 0.309787] vgaarb: loaded
[ 0.309787] ACPI: bus type USB registered
[ 0.309787] usbcore: registered new interface driver usbfs
[ 0.309787] usbcore: registered new interface driver hub
[ 0.309787] usbcore: registered new device driver usb
[ 0.309787] EDAC MC: Ver: 3.0.0
[ 0.309787] PCI: Using ACPI for IRQ routing
[ 0.314537] PCI: pci_cache_line_size set to 64 bytes
[ 0.314588] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.314589] e820: reserve RAM buffer [mem 0xdfe80000-0xdfffffff]
[ 0.314590] e820: reserve RAM buffer [mem 0x41e000000-0x41fffffff]
[ 0.314693] NetLabel: Initializing
[ 0.314694] NetLabel: domain hash size = 128
[ 0.314694] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.314706] NetLabel: unlabeled traffic allowed by default
[ 0.316061] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.316064] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.320067] clocksource: Switched to clocksource hpet
[ 0.332204] VFS: Disk quotas dquot_6.6.0
[ 0.332224] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.332331] AppArmor: AppArmor Filesystem Enabled
[ 0.332359] pnp: PnP ACPI init
[ 0.332577] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.332631] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.333312] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.333313] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.333316] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.333586] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.333588] system 00:03: [io 0x040b] has been reserved
[ 0.333589] system 00:03: [io 0x04d6] has been reserved
[ 0.333590] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.333591] system 00:03: [io 0x0c14] has been reserved
[ 0.333592] system 00:03: [io 0x0c50-0x0c51] has been reserved
[ 0.333593] system 00:03: [io 0x0c52] has been reserved
[ 0.333595] system 00:03: [io 0x0c6c] has been reserved
[ 0.333596] system 00:03: [io 0x0c6f] has been reserved
[ 0.333597] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
[ 0.333598] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
[ 0.333599] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
[ 0.333600] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
[ 0.333601] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
[ 0.333602] system 00:03: [io 0x0b00-0x0b3f] has been reserved
[ 0.333603] system 00:03: [io 0x0800-0x089f] has been reserved
[ 0.333605] system 00:03: [io 0x0b00-0x0b0f] has been reserved
[ 0.333606] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.333607] system 00:03: [io 0x0900-0x090f] has been reserved
[ 0.333608] system 00:03: [io 0x0910-0x091f] has been reserved
[ 0.333609] system 00:03: [io 0xfe00-0xfefe] has been reserved
[ 0.333611] system 00:03: [mem 0xdff00000-0xdfffffff] has been reserved
[ 0.333612] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.333614] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.333615] system 00:03: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.333618] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.333828] system 00:04: [io 0x0230-0x023f] has been reserved
[ 0.333829] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.333831] system 00:04: [io 0x0300-0x030f] has been reserved
[ 0.333832] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.333834] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.333902] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.333905] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334067] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.334068] system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.334069] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.334071] system 00:06: [mem 0x00100000-0xdfefffff] could not be reserved
[ 0.334072] system 00:06: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.334075] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.334198] pnp: PnP ACPI: found 7 devices
[ 0.340974] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.340994] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.340996] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.340999] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
[ 0.341001] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.341003] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.341005] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.341008] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.341009] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.341012] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.341015] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.341026] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.341027] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.341028] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.341030] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.341031] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xdfffffff window]
[ 0.341032] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.341033] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.341034] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
[ 0.341035] pci_bus 0000:01: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.341037] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.341038] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.341039] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.341041] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.341042] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.341043] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.341044] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.341045] pci_bus 0000:04: resource 8 [mem 0xdff00000-0xdfffffff window]
[ 0.341046] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.341141] NET: Registered protocol family 2
[ 0.341670] IP idents hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.343216] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.343508] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.343755] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.343830] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.343915] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.344067] NET: Registered protocol family 1
[ 0.344079] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.345361] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.345368] pci 0000:01:05.1: Linked as a consumer to 0000:01:05.0
[ 0.345369] pci 0000:01:05.1: D0 power state depends on 0000:01:05.0
[ 0.345536] PCI: CLS 64 bytes, default 64
[ 0.345580] Unpacking initramfs...
[ 1.059681] Freeing initrd memory: 58360K
[ 1.060449] PCI-DMA: Disabling AGP.
[ 1.060527] PCI-DMA: aperture base @ d4000000 size 65536 KB
[ 1.060528] PCI-DMA: using GART IOMMU.
[ 1.060530] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.062665] LVT offset 1 assigned for vector 0x400
[ 1.062675] IBS: LVT offset 1 assigned
[ 1.062814] perf: AMD IBS detected (0x0000001f)
[ 1.062875] Scanning for low memory corruption every 60 seconds
[ 1.063482] Initialise system trusted keyrings
[ 1.063490] Key type blacklist registered
[ 1.063598] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 1.064679] zbud: loaded
[ 1.065297] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.065573] fuse init (API version 7.26)
[ 1.069159] Key type asymmetric registered
[ 1.069161] Asymmetric key parser 'x509' registered
[ 1.069220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.069353] io scheduler noop registered
[ 1.069355] io scheduler deadline registered
[ 1.069409] io scheduler cfq registered (default)
[ 1.070193] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 1.070195] vesafb: scrolling: redraw
[ 1.070196] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.070209] vesafb: framebuffer at 0xfa000000, mapped to 0x (ptrval), using 1216k, total 1216k
[ 1.070344] Console: switching to colour frame buffer device 80x30
[ 1.070353] fb0: VESA VGA frame buffer device
[ 1.070434] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.070443] ACPI: Power Button [PWRB]
[ 1.070478] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.070535] ACPI: Power Button [PWRF]
[ 1.070565] ACPI: ACPI: processor limited to max C-state 1
[ 1.071219] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.073672] Linux agpgart interface v0.103
[ 1.075815] loop: module loaded
[ 1.076070] tun: Universal TUN/TAP device driver, 1.6
[ 1.076136] PPP generic driver version 2.4.2
[ 1.076188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.076191] ehci-pci: EHCI PCI platform driver
[ 1.076422] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.076429] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.076433] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.076442] ehci-pci 0000:00:12.2: debug port 1
[ 1.076484] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff800
[ 1.096089] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.096154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.096156] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.096157] usb usb1: Product: EHCI Host Controller
[ 1.096158] usb usb1: Manufacturer: Linux 4.15.0-191-generic ehci_hcd
[ 1.096159] usb usb1: SerialNumber: 0000:00:12.2
[ 1.096307] hub 1-0:1.0: USB hub found
[ 1.096313] hub 1-0:1.0: 6 ports detected
[ 1.096656] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.096661] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.096664] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.096673] ehci-pci 0000:00:13.2: debug port 1
[ 1.096712] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8ff400
[ 1.112098] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.112148] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.112149] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.112150] usb usb2: Product: EHCI Host Controller
[ 1.112151] usb usb2: Manufacturer: Linux 4.15.0-191-generic ehci_hcd
[ 1.112151] usb usb2: SerialNumber: 0000:00:13.2
[ 1.112328] hub 2-0:1.0: USB hub found
[ 1.112333] hub 2-0:1.0: 6 ports detected
[ 1.112507] ehci-platform: EHCI generic platform driver
[ 1.112528] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.112538] ohci-pci: OHCI PCI platform driver
[ 1.112752] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.112761] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.112794] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe8fe000
[ 1.176112] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.176114] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.176115] usb usb3: Product: OHCI PCI host controller
[ 1.176116] usb usb3: Manufacturer: Linux 4.15.0-191-generic ohci_hcd
[ 1.176117] usb usb3: SerialNumber: 0000:00:12.0
[ 1.176292] hub 3-0:1.0: USB hub found
[ 1.176299] hub 3-0:1.0: 3 ports detected
[ 1.176623] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.176629] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.176654] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe8fd000
[ 1.240113] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.240115] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240116] usb usb4: Product: OHCI PCI host controller
[ 1.240116] usb usb4: Manufacturer: Linux 4.15.0-191-generic ohci_hcd
[ 1.240117] usb usb4: SerialNumber: 0000:00:12.1
[ 1.240263] hub 4-0:1.0: USB hub found
[ 1.240270] hub 4-0:1.0: 3 ports detected
[ 1.240610] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.240617] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.240650] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe8fc000
[ 1.304112] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.304114] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.304115] usb usb5: Product: OHCI PCI host controller
[ 1.304116] usb usb5: Manufacturer: Linux 4.15.0-191-generic ohci_hcd
[ 1.304117] usb usb5: SerialNumber: 0000:00:13.0
[ 1.304289] hub 5-0:1.0: USB hub found
[ 1.304296] hub 5-0:1.0: 3 ports detected
[ 1.304576] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.304582] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.304604] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe8fb000
[ 1.368113] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.368115] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.368115] usb usb6: Product: OHCI PCI host controller
[ 1.368116] usb usb6: Manufacturer: Linux 4.15.0-191-generic ohci_hcd
[ 1.368117] usb usb6: SerialNumber: 0000:00:13.1
[ 1.368292] hub 6-0:1.0: USB hub found
[ 1.368300] hub 6-0:1.0: 3 ports detected
[ 1.368584] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.368589] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.368617] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe8fa000
[ 1.432118] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.432120] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.432121] usb usb7: Product: OHCI PCI host controller
[ 1.432122] usb usb7: Manufacturer: Linux 4.15.0-191-generic ohci_hcd
[ 1.432123] usb usb7: SerialNumber: 0000:00:14.5
[ 1.432293] hub 7-0:1.0: USB hub found
[ 1.432301] hub 7-0:1.0: 2 ports detected
[ 1.432423] ohci-platform: OHCI generic platform driver
[ 1.432444] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.432614] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.432624] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 1.442241] xhci_hcd 0000:02:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[ 1.442431] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.442432] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.442433] usb usb8: Product: xHCI Host Controller
[ 1.442434] usb usb8: Manufacturer: Linux 4.15.0-191-generic xhci-hcd
[ 1.442435] usb usb8: SerialNumber: 0000:02:00.0
[ 1.442568] hub 8-0:1.0: USB hub found
[ 1.442575] hub 8-0:1.0: 2 ports detected
[ 1.442653] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.442656] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 1.442658] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 1.442674] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.442687] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.442688] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.442689] usb usb9: Product: xHCI Host Controller
[ 1.442690] usb usb9: Manufacturer: Linux 4.15.0-191-generic xhci-hcd
[ 1.442691] usb usb9: SerialNumber: 0000:02:00.0
[ 1.442800] hub 9-0:1.0: USB hub found
[ 1.442806] hub 9-0:1.0: 2 ports detected
[ 1.442946] i8042: PNP: No PS/2 controller found.
[ 1.442948] i8042: Probing ports directly.
[ 1.443360] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.443367] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.443545] mousedev: PS/2 mouse device common for all mice
[ 1.443759] rtc_cmos 00:01: RTC can wake from S4
[ 1.443916] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.443940] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.443948] i2c /dev entries driver
[ 1.444029] device-mapper: uevent: version 1.0.3
[ 1.444146] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.444275] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.444838] NET: Registered protocol family 10
[ 1.449670] Segment Routing with IPv6
[ 1.449695] NET: Registered protocol family 17
[ 1.449836] Key type dns_resolver registered
[ 1.450359] mce: Using 6 MCE banks
[ 1.450382] RAS: Correctable Errors collector initialized.
[ 1.450418] microcode: CPU0: patch_level=0x010000c8
[ 1.450436] microcode: CPU1: patch_level=0x010000c8
[ 1.450454] microcode: CPU2: patch_level=0x010000c8
[ 1.450473] microcode: CPU3: patch_level=0x010000c8
[ 1.450535] microcode: Microcode Update Driver: v2.2.
[ 1.450544] sched_clock: Marking stable (1450530765, 0)->(1432362461, 18168304)
[ 1.450797] registered taskstats version 1
[ 1.450805] Loading compiled-in X.509 certificates
[ 1.453780] Loaded X.509 cert 'Build time autogenerated kernel key: c22b55fccca0ab4a1b471e83eb5a5035df964114'
[ 1.454747] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 1.455700] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 1.455701] blacklist: Loading compiled-in revocation X.509 certificates
[ 1.455720] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 1.455750] zswap: loaded using pool lzo/zbud
[ 1.460341] Key type big_key registered
[ 1.460348] Key type trusted registered
[ 1.462410] Key type encrypted registered
[ 1.462417] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.462420] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.462427] ima: Allocated hash algorithm: sha1
[ 1.462444] evm: HMAC attrs: 0x1
[ 1.462662] Magic number: 2:120:225
[ 1.462729] memory memory107: hash matches
[ 1.462801] rtc_cmos 00:01: setting system clock to 2022-08-25 10:12:41 UTC (1661422361)
[ 1.462993] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.463435] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.463436] EDD information not available.
[ 1.536047] random: fast init done
[ 2.071058] Freeing unused kernel image memory: 2468K
[ 2.080127] tsc: Refined TSC clocksource calibration: 3214.431 MHz
[ 2.080135] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e558aca513, max_idle_ns: 440795308132 ns
[ 2.092121] Write protecting the kernel read-only data: 20480k
[ 2.093898] Freeing unused kernel image memory: 2008K
[ 2.094433] Freeing unused kernel image memory: 1820K
[ 2.103336] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.119792] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.119877] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.119883] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.180090] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.180103] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.180702] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0x (ptrval), c8:60:00:56:47:9d, XID 0c900880 IRQ 29
[ 2.180703] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.184710] scsi host0: pata_atiixp
[ 2.184810] scsi host1: pata_atiixp
[ 2.184843] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.184844] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.185260] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170831/utaddress-247)
[ 2.185270] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170831/utaddress-247)
[ 2.185274] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20170831/utaddress-247)
[ 2.185278] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20170831/utaddress-247)
[ 2.185283] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20170831/utaddress-247)
[ 2.185286] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20170831/utaddress-247)
[ 2.185289] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.185741] ahci 0000:00:11.0: version 3.0
[ 2.186049] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.186051] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.189650] scsi host2: ahci
[ 2.196076] scsi host3: ahci
[ 2.196487] scsi host4: ahci
[ 2.196782] scsi host5: ahci
[ 2.196906] scsi host6: ahci
[ 2.200092] scsi host7: ahci
[ 2.200158] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
[ 2.200160] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
[ 2.200162] ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
[ 2.200164] ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
[ 2.200166] ata7: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff00 irq 22
[ 2.200167] ata8: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff80 irq 22
[ 2.205689] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 2.523927] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.523960] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.523993] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.524066] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.680128] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.681355] ata3.00: ATA-8: ST31000528AS, CC46, max UDMA/133
[ 2.681357] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.682819] ata3.00: configured for UDMA/133
[ 2.683094] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC46 PQ: 0 ANSI: 5
[ 2.683553] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.683638] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.683661] sd 2:0:0:0: [sda] Write Protect is off
[ 2.683663] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.683712] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.684099] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.685089] ata5.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133
[ 2.685092] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.686220] ata5.00: configured for UDMA/133
[ 2.686481] scsi 4:0:0:0: Direct-Access ATA TOSHIBA DT01ACA1 A750 PQ: 0 ANSI: 5
[ 2.686947] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 2.687019] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.687021] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 2.687050] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.687053] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.687130] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.750775] sda: sda1 sda2 sda3 sda4 sda5
[ 2.751904] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.752253] sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[ 2.753366] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.783900] [drm] radeon kernel modesetting enabled.
[ 2.784001] checking generic (fa000000 130000) vs hw (fa000000 2000000)
[ 2.784003] fb: switching to radeondrmfb from VESA VGA
[ 2.784025] Console: switching to colour dummy device 80x25
[ 2.784438] [drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1043:0x8388 0x00).
[ 2.784467] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[ 2.784472] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs
[ 2.785023] ATOM BIOS: B27722_RS780C
[ 2.785037] radeon 0000:01:05.0: VRAM: 32M 0x00000000C0000000 - 0x00000000C1FFFFFF (32M used)
[ 2.785038] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 2.785043] [drm] Detected VRAM RAM=32M, BAR=32M
[ 2.785044] [drm] RAM width 32bits DDR
[ 2.785169] [TTM] Zone kernel: Available graphics memory: 8195466 kiB
[ 2.785170] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.785170] [TTM] Initializing pool allocator
[ 2.785173] [TTM] Initializing DMA pool allocator
[ 2.785252] [drm] radeon: 32M of VRAM memory ready
[ 2.785253] [drm] radeon: 512M of GTT memory ready.
[ 2.785259] [drm] Loading RS780 Microcode
[ 2.785325] [drm] radeon: power management initialized
[ 2.785329] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.797862] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 2.797975] radeon 0000:01:05.0: WB enabled
[ 2.797978] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x (ptrval)
[ 2.797980] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.797980] [drm] Driver supports precise vblank timestamp query.
[ 2.797982] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[ 2.797995] [drm] radeon: irq initialized.
[ 2.829790] [drm] ring test on 0 succeeded in 1 usecs
[ 2.829878] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.830329] [drm] Radeon Display Connectors
[ 2.830329] [drm] Connector 0:
[ 2.830330] [drm] VGA-1
[ 2.830331] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 2.830331] [drm] Encoders:
[ 2.830332] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.830332] [drm] Connector 1:
[ 2.830333] [drm] DVI-D-1
[ 2.830333] [drm] HPD1
[ 2.830334] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 2.830334] [drm] Encoders:
[ 2.830335] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 2.845460] [drm] Cannot find any crtc or sizes
[ 2.845514] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on minor 0
[ 3.054341] md/raid1:md0: active with 2 out of 2 mirrors
[ 3.054363] md0: detected capacity change from 0 to 511639552
[ 3.055458] md/raid1:md1: active with 2 out of 2 mirrors
[ 3.055485] md1: detected capacity change from 0 to 9474932736
[ 3.076990] md/raid1:md2: active with 2 out of 2 mirrors
[ 3.098317] md2: detected capacity change from 0 to 137303687168
[ 3.104250] clocksource: Switched to clocksource tsc
[ 3.118200] md/raid1:md3: active with 2 out of 2 mirrors
[ 3.143892] md3: detected capacity change from 0 to 852630372352
[ 3.893467] [drm] Cannot find any crtc or sizes
[ 4.496062] raid6: sse2x1 gen() 4223 MB/s
[ 4.544058] raid6: sse2x1 xor() 4297 MB/s
[ 4.592064] raid6: sse2x2 gen() 6435 MB/s
[ 4.640057] raid6: sse2x2 xor() 7039 MB/s
[ 4.688066] raid6: sse2x4 gen() 7768 MB/s
[ 4.736058] raid6: sse2x4 xor() 4376 MB/s
[ 4.736059] raid6: using algorithm sse2x4 gen() 7768 MB/s
[ 4.736059] raid6: .... xor() 4376 MB/s, rmw enabled
[ 4.736061] raid6: using intx1 recovery algorithm
[ 4.737486] xor: measuring software checksum speed
[ 4.776064] prefetch64-sse: 12229.000 MB/sec
[ 4.816063] generic_sse: 11726.000 MB/sec
[ 4.816064] xor: using function: prefetch64-sse (12229.000 MB/sec)
[ 4.817435] async_tx: api initialized (async)
[ 5.001482] r8169 0000:03:00.0 enp3s0: link down
[ 5.001485] r8169 0000:03:00.0 enp3s0: link down
[ 5.001543] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 8.217540] r8169 0000:03:00.0 enp3s0: link up
[ 8.217549] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 17.864117] random: crng init done
[ 17.864120] random: 7 urandom warning(s) missed due to ratelimiting
[ 24.955465] NET: Registered protocol family 38
[ 35.937611] Btrfs loaded, crc32c=crc32c-generic
[ 36.216573] BTRFS: device label BACKUP devid 1 transid 7779 /dev/mapper/md3_crypt
[ 36.455423] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 37.984667] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 38.108691] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 38.108826] systemd[1]: Detected architecture x86-64.
[ 38.123897] systemd[1]: Set hostname to .
[ 39.240329] systemd[1]: Created slice User and Session Slice.
[ 39.240614] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 39.240687] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 39.240716] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 39.240728] systemd[1]: Reached target User and Group Name Lookups.
[ 39.240741] systemd[1]: Reached target Remote File Systems.
[ 39.241098] systemd[1]: Created slice System Slice.
[ 39.437373] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 39.637594] systemd-journald[801]: Received request to flush runtime journal from PID 1
[ 39.683539] lp: driver loaded but no devices found
[ 39.721447] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 39.729832] ppdev: user-space parallel port driver
[ 39.962495] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 41.335893] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.355170] ATK0110 ATK0110:00: Overriding interface detection
[ 41.355335] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 43.330057] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card0/input5
[ 43.477338] kvm: Nested Virtualization enabled
[ 43.477342] kvm: Nested Paging enabled
[ 43.607903] MCE: In-kernel MCE decoding enabled.
[ 43.714310] EDAC amd64: Node 0: DRAM ECC disabled.
[ 43.714312] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 43.748569] EDAC amd64: Node 0: DRAM ECC disabled.
[ 43.748571] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 43.788547] EDAC amd64: Node 0: DRAM ECC disabled.
[ 43.788549] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 43.820550] EDAC amd64: Node 0: DRAM ECC disabled.
[ 43.820552] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 44.966867] Adding 9236476k swap on /dev/mapper/md1_crypt. Priority:-2 extents:1 across:9236476k FS
[ 45.149923] BTRFS info (device dm-1): use zstd compression, level 0
[ 45.149927] BTRFS info (device dm-1): disk space caching is enabled
[ 45.149928] BTRFS info (device dm-1): has skinny extents
[ 45.975890] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem
[ 46.589483] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 49.662692] audit: type=1400 audit(1661422409.693:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=1352 comm="apparmor_parser"
[ 49.664563] audit: type=1400 audit(1661422409.697:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1349 comm="apparmor_parser"
[ 49.664573] audit: type=1400 audit(1661422409.697:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1349 comm="apparmor_parser"
[ 49.664575] audit: type=1400 audit(1661422409.697:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1349 comm="apparmor_parser"
[ 49.713549] audit: type=1400 audit(1661422409.745:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1371 comm="apparmor_parser"
[ 49.762277] audit: type=1400 audit(1661422409.793:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/charon" pid=1350 comm="apparmor_parser"
[ 49.780384] audit: type=1400 audit(1661422409.813:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=1376 comm="apparmor_parser"
[ 49.780391] audit: type=1400 audit(1661422409.813:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=1376 comm="apparmor_parser"
[ 49.783777] audit: type=1400 audit(1661422409.813:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1372 comm="apparmor_parser"
[ 49.802328] audit: type=1400 audit(1661422409.833:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1347 comm="apparmor_parser"
[ 50.169460] r8169 0000:03:00.0 enp3s0: link down
[ 50.169492] r8169 0000:03:00.0 enp3s0: link down
[ 50.169564] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 53.199818] r8169 0000:03:00.0 enp3s0: link up
[ 53.199828] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 57.109936] vboxdrv: loading out-of-tree module taints kernel.
[ 57.110418] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 57.117353] vboxdrv: Found 4 processor cores
[ 57.136630] vboxdrv: TSC mode is Invariant, tentative frequency 3214414309 Hz
[ 57.136634] vboxdrv: Successfully loaded version 5.2.42_Ubuntu (interface 0x00290001)
[ 57.164570] VBoxNetFlt: Successfully started.
[ 57.213298] VBoxNetAdp: Successfully started.
[ 57.420181] VBoxPciLinuxInit
[ 57.561957] vboxpci: IOMMU not found (not registered)
[ 57.815981] NET: Registered protocol family 15
[ 58.596929] Initializing XFRM netlink socket
[ 58.879161] aufs 4.15-20180219
[ 58.988768] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 65.062590] kauditd_printk_skb: 12 callbacks suppressed
[ 65.062595] audit: type=1400 audit(1661422425.093:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2992 comm="apparmor_parser"
[ 71.318475] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 71.411633] Bridge firewalling registered
[ 71.787590] Netfilter messages via NETLINK v0.30.
[ 71.794882] ctnetlink v0.93: registering with nfnetlink.
[ 72.077256] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 590.732414] SUPR0GipMap: fGetGipCpu=0xb
[ 596.509801] vboxdrv: 0000000000000000 VMMR0.r0
[ 596.999175] vboxdrv: 0000000000000000 VBoxDDR0.r0
[ 597.201660] VBoxNetFlt: attached to 'enp3s0' / c8:60:00:56:47:9d
[ 597.231414] device enp3s0 entered promiscuous mode
[ 4000.608359] device enp3s0 left promiscuous mode
[ 4000.624495] vboxnetflt: 0 out of 32128650 packets were not sent (directed to host)
[ 4739.773612] vboxdrv: 0000000000000000 VMMR0.r0
[ 4739.978767] vboxdrv: 0000000000000000 VBoxDDR0.r0
[ 4740.149320] VBoxNetFlt: attached to 'enp3s0' / c8:60:00:56:47:9d
[ 4740.181669] device enp3s0 entered promiscuous mode
[ 4885.360075] device enp3s0 left promiscuous mode
[ 4885.378862] vboxnetflt: 0 out of 857 packets were not sent (directed to host)
[ 4896.278113] vboxdrv: 0000000000000000 VMMR0.r0
[ 4896.484291] vboxdrv: 0000000000000000 VBoxDDR0.r0
[ 4896.560023] VBoxNetFlt: attached to 'enp3s0' / c8:60:00:56:47:9d
[ 4896.592739] device enp3s0 entered promiscuous mode
[ 7611.463117] hrtimer: interrupt took 35565 ns
[ 8241.011882] device enp3s0 left promiscuous mode
[ 8241.076601] vboxnetflt: 21 out of 35948 packets were not sent (directed to host)
[ 8251.633166] vboxdrv: 0000000000000000 VMMR0.r0
[ 8251.835278] vboxdrv: 0000000000000000 VBoxDDR0.r0
[ 8251.962758] VBoxNetFlt: attached to 'enp3s0' / c8:60:00:56:47:9d
[ 8251.996947] device enp3s0 entered promiscuous mode
[ 9652.655470] device enp3s0 left promiscuous mode
[ 9652.695943] vboxnetflt: 0 out of 18498 packets were not sent (directed to host)
[10545.454725] vboxdrv: 0000000000000000 VMMR0.r0
[10545.668222] vboxdrv: 0000000000000000 VBoxDDR0.r0
[10545.756727] VBoxNetFlt: attached to 'enp3s0' / c8:60:00:56:47:9d
[10545.781354] device enp3s0 entered promiscuous mode
[11720.628599] conntrack: generic helper won't handle protocol 47. Please consider loading the specific helper module.
[24407.770730] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[823452.848445] md: data-check of RAID array md0
[823453.065057] md: delaying data-check of md1 until md0 has finished (they share one or more physical units)
[823453.094129] md: delaying data-check of md2 until md0 has finished (they share one or more physical units)
[823453.123610] md: delaying data-check of md3 until md0 has finished (they share one or more physical units)
[823457.474592] md: md0: data-check done.
[823457.487173] md: delaying data-check of md2 until md1 has finished (they share one or more physical units)
[823457.487176] md: data-check of RAID array md1
[823457.487200] md: delaying data-check of md3 until md2 has finished (they share one or more physical units)
[823537.804855] md: md1: data-check done.
[823537.819383] md: data-check of RAID array md2
[824713.670980] md: md2: data-check done.
[824713.686307] md: data-check of RAID array md3
[834456.771631] md: md3: data-check done.
[1793496.321309] systemd: 31 output lines suppressed due to ratelimiting
[1793496.326109] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[1793496.326267] systemd[1]: Detected architecture x86-64.
[1793496.876357] systemd[1]: Stopping Journal Service...
[1793496.876830] systemd-journald[801]: Received SIGTERM from PID 1 (systemd).
[1793497.748296] systemd[1]: Stopped Journal Service.
[1793497.753910] systemd[1]: Starting Journal Service...
[1793497.834212] systemd[1]: Started Journal Service.
|
Top
of page